keiomobile2 password authentication method

Android 10

This manual is based on Android 10 (moto g8). Some details may differ depending on version, devices and environment.

1. Click [Settings].

   
   
   

2. Click [Network & internet] - [Wi-Fi].
   Turn Wi-Fi on if it is [Wi-Fi OFF].

   
   
   

3. Select [keiomobile2] or [eduroam].
   
   

   
   
   

4. To connect to keiomobile2, after connecting to [keiomobile2], enter the following setting.
   To connect to eduroam, after connecting to [eduroam], enter the following setting.
   EAP method: PEAP
   Phase2 authentication: MSCHAPV2
   CA certificate: Security Communication RootCA2
   ※If CA certificate cannot be selected, see Download Root Certificate
   

   

5. Enter [ID] and [Password] and finally, tap [Connect].
   In the keio.jp (Keio ID) case, enter “Wi-Fi user name” and “Wi-Fi password”.
   In the ITC account case, enter “Your ITC account@user.keio.ac.jp” and “Wi-Fi connection password at ITC account”.
   ※If you are asked to enter the domain, please enter as follows
   in the keio.jp(Keio ID) case wrcore2.itc.keio.ac.jp
   in the ITC account case wifi-entry.user.keio.ac.jp
   

   
   
   

6. This completes the Wi-Fi connection process. If you have successfully connected, no further work is required.

   
   

Download Root Certificate

1. Start up the web browser and go to https://wifi-entry.user.keio.ac.jp/index.html.en
   “Generate Wi-Fi password for keiomobile2” page shows up, then click the link “Seccurity Communication RootCA2” to download the certificate.

   
   
   

2. In [Name the certificate] window, enter "Security Communication RootCA2" for [Certificate name:] and "Wi-Fi" for [Credential use:].
   Click [OK].